Important Disclaimer ⚠️
Indra do not advertise our products as Home Storage Battery Compatible.
We can offer recommendations for configurations that may give desirable results, but it’s the installer’s responsibility to confirm if these are suitable for your specific setup.
Indra takes no responsibility for any negative effects caused by reconfiguring work done to the installation.
Solar & Battery Interaction 🔋☀️
Indra chargers cannot differentiate between solar export and battery export.
EV chargers cannot communicate directly with the home storage battery unless they are of the same brand.
Ways to Mitigate This Issue
- Match schedules: Set the battery charging schedule to match the car charging schedule. This way, the battery will be busy charging instead of discharging into the car.
- Turn off the battery when the car is charging (not very practical).
- Configuring the installation so the battery does not discharge into the car
Configuring the Installation to Prevent Battery Drain 🔋🚫
These methods can only be used if the charger is supplied from its own consumer unit, fed directly from the main supply tails.
How to Configure:
Move the home storage battery CT to a position where it cannot detect the charger’s load -this prevents the battery from discharging into the EV charger.
(See examples below for recommended CT placement.)
Charger on its own consumer unit, house and solar/battery on another
Comments
0 comments
Please sign in to leave a comment.